本文整理汇总了Python中util.expect_setup_callback函数 的典型用法代码示例。如果您正苦于以下问题：Python expect_setup_callback函数的具体用法？Python expect_setup_callback怎么用？Python expect_setup_callback使用的例子？那么恭喜您, 这里精选的函数代码示例或许可以为您提供帮助。
在下文中一共展示了expect_setup_callback函数 的19个代码示例，这些例子默认根据受欢迎程度排序。您可以为喜欢或者感觉有用的代码点赞，您的评价将有助于我们的系统推荐出更棒的Python代码示例。
示例1: fly_CopterAVC
def fly_CopterAVC(binary, viewerip=None, map=False, valgrind=False, gdb=False):
"""fly ArduCopter in SIL for AVC2013 mission
"""
global homeloc
home = "%f,%f,%u,%u" % (AVCHOME.lat, AVCHOME.lng, AVCHOME.alt, AVCHOME.heading)
sil = util.start_SIL(binary, wipe=True, model="heli", home=home, speedup=speedup_default)
mavproxy = util.start_MAVProxy_SIL("ArduCopter", options="--sitl=127.0.0.1:5501 --out=127.0.0.1:19550")
mavproxy.expect("Received [0-9]+ parameters")
# setup test parameters
mavproxy.send("param load %s/Helicopter.parm\n" % testdir)
mavproxy.expect("Loaded [0-9]+ parameters")
mavproxy.send("param set LOG_REPLAY 1\n")
mavproxy.send("param set LOG_DISARMED 1\n")
time.sleep(3)
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL(binary, model="heli", home=home, speedup=speedup_default, valgrind=valgrind, gdb=gdb)
options = "--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=5"
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += " --map"
mavproxy = util.start_MAVProxy_SIL("ArduCopter", options=options)
mavproxy.expect("Telemetry log: (\S+)")
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/CopterAVC-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
# the received parameters can come before or after the ready to fly message
mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])
mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sil, mavproxy])
if map:
mavproxy.send("map icon 40.072467969730496 -105.2314389590174\n")
mavproxy.send("map icon 40.072600990533829 -105.23146100342274\n")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection("127.0.0.1:19550", robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:gjweppler， 项目名称:ardupilot， 代码行数:60， 代码来源:arducopter.py
示例2: fly_CopterAVC
def fly_CopterAVC(viewerip=None, map=False):
'''fly ArduCopter in SIL for AVC2013 mission
'''
global homeloc
if TARGET != 'sitl':
util.build_SIL('ArduCopter', target=TARGET)
home = "%f,%f,%u,%u" % (AVCHOME.lat, AVCHOME.lng, AVCHOME.alt, AVCHOME.heading)
sil = util.start_SIL('ArduCopter', wipe=True, model='heli', home=home, speedup=speedup_default)
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550')
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send("param load %s/Helicopter.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('ArduCopter', model='heli', home=home, speedup=speedup_default)
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=5'
if viewerip:
options += ' --out=%s:14550' % viewerip
if map:
options += ' --map'
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
mavproxy.expect('Telemetry log: (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/CopterAVC-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
# the received parameters can come before or after the ready to fly message
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sil, mavproxy])
if map:
mavproxy.send('map icon 40.072467969730496 -105.2314389590174\n')
mavproxy.send('map icon 40.072600990533829 -105.23146100342274\n')
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:CHRADI， 项目名称:ardupilot， 代码行数:60， 代码来源:arducopter.py
示例3: drive_APMrover2
def drive_APMrover2(viewerip=None):
'''drive APMrover2 in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the mission in real time
'''
global homeloc
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=10'
if viewerip:
options += " --out=%s:14550" % viewerip
sil = util.start_SIL('APMrover2', wipe=True)
mavproxy = util.start_MAVProxy_SIL('APMrover2', options=options)
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send('param set SYSID_THISMAV %u\n' % random.randint(100, 200))
mavproxy.send("param load %s/Rover.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# restart with new parms
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sim_cmd = util.reltopdir('Tools/autotest/pysim/sim_rover.py') + ' --rate=50 --home=%f,%f,%u,%u' % (
HOME.lat, HOME.lng, HOME.alt, HOME.heading)
runsim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
runsim.delaybeforesend = 0
util.pexpect_autoclose(runsim)
runsim.expect('Starting at lat')
sil = util.start_SIL('APMrover2')
mavproxy = util.start_MAVProxy_SIL('APMrover2', options=options)
mavproxy.expect('Logging to (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/APMrover2-test.mavlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
os.link(logfile, buildlog)
mavproxy.expect('Received [0-9]+ parameters')
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([runsim, sil, mavproxy])
print("Started simulator")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:DaveCrone， 项目名称:ardupilot， 代码行数:60， 代码来源:apmrover2.py
示例4: drive_APMrover2
def drive_APMrover2(viewerip=None, map=False, valgrind=False):
'''drive APMrover2 in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the mission in real time
'''
global homeloc
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=10'
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += ' --map'
home = "%f,%f,%u,%u" % (HOME.lat, HOME.lng, HOME.alt, HOME.heading)
sil = util.start_SIL('APMrover2', wipe=True, model='rover', home=home, speedup=10)
mavproxy = util.start_MAVProxy_SIL('APMrover2', options=options)
print("WAITING FOR PARAMETERS")
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send("param load %s/Rover.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# restart with new parms
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('APMrover2', model='rover', home=home, speedup=10, valgrind=valgrind)
mavproxy = util.start_MAVProxy_SIL('APMrover2', options=options)
mavproxy.expect('Telemetry log: (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/APMrover2-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
mavproxy.expect('Received [0-9]+ parameters')
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sil, mavproxy])
print("Started simulator")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:Annashuang， 项目名称:ardupilot， 代码行数:59， 代码来源:apmrover2.py
示例5: fly_ArduCopter_scripted
def fly_ArduCopter_scripted(testname):
'''fly ArduCopter in SIL
'''
global homeloc
sim_cmd = util.reltopdir('Tools/autotest/pysim/sim_multicopter.py') + ' --frame=%s --rate=400 --home=%f,%f,%u,%u' % (
FRAME, HOME.lat, HOME.lng, HOME.alt, HOME.heading)
sim_cmd += ' --wind=6,45,.3'
sil = util.start_SIL('ArduCopter', wipe=True)
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter')
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send('param set SYSID_THISMAV %u\n' % random.randint(100, 200))
mavproxy.send("param load %s/ArduCopter.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('ArduCopter', height=HOME.alt)
sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
sim.delaybeforesend = 0
util.pexpect_autoclose(sim)
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5'
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
mavproxy.expect('Logging to (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/ArduCopter-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
os.link(logfile, buildlog)
# the received parameters can come before or after the ready to fly message
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
util.expect_setup_callback(mavproxy, arducopter.expect_callback)
expect_list_clear()
expect_list_extend([sim, sil, mavproxy])
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:AeroDragon， 项目名称:ArduCopter， 代码行数:55， 代码来源:autotest_jenkins.py
示例6: run_mission
def run_mission(mission_path, frame, home, viewerip=None):
sim_cmd = util.reltopdir('Tools/autotest/pysim/sim_multicopter.py')
sim_cmd += ' --frame=%s --rate=400 --home=%f,%f,%u,%u' % (
frame, home.lat, home.lng, home.alt, home.heading)
sim_cmd += ' --wind=6,45,.3'
if viewerip:
sim_cmd += ' --fgout=%s:5503' % viewerip
sil = util.start_SIL('ArduCopter', wipe=True)
mavproxy = util.start_MAVProxy_SIL(
'ArduCopter',
options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter')
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send('param set SYSID_THISMAV %u\n' % random.randint(100, 200))
mavproxy.send("param load %s/autotest/ArduCopter.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
mavproxy.send('module load mmap\n')
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('ArduCopter', height=home.alt)
print 'Executing command %s' % (sim_cmd,)
sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
sim.delaybeforesend = 0
util.pexpect_autoclose(sim)
options = ('--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter '
'--streamrate=5')
if viewerip:
options += ' --out=%s:14550' % viewerip
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
mavproxy.expect('Logging to (\S+)')
logfile = mavproxy.match.group(1)
print 'Saving log %s' % (logfile,)
# the received parameters can come before or after the ready to fly message
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.send('module load mmap\n')
util.expect_setup_callback(mavproxy, common.expect_callback)
common.expect_list_clear()
common.expect_list_extend([sim, sil, mavproxy])
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
error("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:0919061， 项目名称:ardupilot， 代码行数:54， 代码来源:run_sim_mission.py
示例7: fly_ArduPlane
def fly_ArduPlane(binary, viewerip=None, map=False, valgrind=False, gdb=False):
'''fly ArduPlane in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the flight in real time
'''
global homeloc
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=10'
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += ' --map'
sil = util.start_SIL(binary, model='plane-elevrev', home=HOME_LOCATION, speedup=10,
valgrind=valgrind, gdb=gdb,
defaults_file=os.path.join(testdir, 'default_params/ArduPlane.parm'))
mavproxy = util.start_MAVProxy_SIL('ArduPlane', options=options)
mavproxy.expect('Telemetry log: (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/ArduPlane-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
util.expect_setup_callback(mavproxy, expect_callback)
mavproxy.expect('Received [0-9]+ parameters')
expect_list_clear()
expect_list_extend([sil, mavproxy])
print("Started simulator")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:B-robur， 项目名称:ardupilot， 代码行数:46， 代码来源:arduplane.py
示例8: fly_ArduPlane
def fly_ArduPlane(viewerip=None, map=False):
'''fly ArduPlane in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the flight in real time
'''
global homeloc
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=10'
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += ' --map'
sil = util.start_SIL('ArduPlane', wipe=True, model='jsbsim', home=HOME_LOCATION, speedup=10)
print("Starting MAVProxy")
mavproxy = util.start_MAVProxy_SIL('ArduPlane', options=options)
util.expect_setup_callback(mavproxy, expect_callback)
mavproxy.expect('Telemetry log: (\S+)')
mavproxy.expect('Received [0-9]+ parameters',timeout=3000)
# setup test parameters
mavproxy.send("param load %s/ArduPlane.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
mavproxy.send("param fetch\n")
# restart with new parms
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('ArduPlane', model='jsbsim', home=HOME_LOCATION, speedup=10)
mavproxy = util.start_MAVProxy_SIL('ArduPlane', options=options)
mavproxy.expect('Telemetry log: (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/ArduPlane-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
util.expect_setup_callback(mavproxy, expect_callback)
mavproxy.expect('Received [0-9]+ parameters')
expect_list_clear()
expect_list_extend([sil, mavproxy])
print("Started simulator")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:AurelienRoy， 项目名称:ardupilot， 代码行数:62， 代码来源:arduplane.py
示例9: fly_ArduCopter
def fly_ArduCopter(viewerip=None, map=False):
"""fly ArduCopter in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the flight in real time
"""
global homeloc
if TARGET != "sitl":
util.build_SIL("ArduCopter", target=TARGET)
sim_cmd = util.reltopdir(
"Tools/autotest/pysim/sim_multicopter.py"
) + " --frame=%s --rate=400 --home=%f,%f,%u,%u" % (FRAME, HOME.lat, HOME.lng, HOME.alt, HOME.heading)
sim_cmd += " --wind=6,45,.3"
if viewerip:
sim_cmd += " --fgout=%s:5503" % viewerip
sil = util.start_SIL("ArduCopter", wipe=True)
mavproxy = util.start_MAVProxy_SIL("ArduCopter", options="--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter")
mavproxy.expect("Received [0-9]+ parameters")
# setup test parameters
mavproxy.send("param load %s/copter_params.parm\n" % testdir)
mavproxy.expect("Loaded [0-9]+ parameters")
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL("ArduCopter", height=HOME.alt)
sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
sim.delaybeforesend = 0
util.pexpect_autoclose(sim)
options = "--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5"
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += " --map"
mavproxy = util.start_MAVProxy_SIL("ArduCopter", options=options)
mavproxy.expect("Logging to (\S+)")
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/ArduCopter-test.tlog")
print("buildlog=%s" % buildlog)
copyTLog = False
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
print(
"WARN: Failed to create symlink: "
+ logfile
+ " => "
+ buildlog
+ ", Will copy tlog manually to target location"
)
copyTLog = True
# the received parameters can come before or after the ready to fly message
mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])
mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sim, sil, mavproxy])
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection("127.0.0.1:19550", robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:MarkMote， 项目名称:ardupilot， 代码行数:76， 代码来源:arducopter.py
示例10: drive_APMrover2
def drive_APMrover2(viewerip=None, map=False, console=False):
'''drive APMrover2 in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the mission in real time
'''
sim_mode='HOLD' #config mode 4 system tests (AUTO | HOLD | GUIDED)
loop_mode='SIL' #HIL or SIL mode (HIL | SIL)
global homeloc
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --out=192.168.1.61:14501 --out=127.0.0.1:6601 --streamrate=10'
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += ' --map'
if console:
options += ' --console'
if loop_mode == 'SIL':
sil = util.start_SIL('APMrover2', wipe=True)
mavproxy = util.start_MAVProxy_SIL('APMrover2', options=options)
if loop_mode == 'HIL':
sil = util.start_HIL('APMrover2', wipe=True)
mavproxy = util.start_MAVProxy_HIL('APMrover2', options=options)
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
# mavproxy.send("param load %s/Rover.parm\n" % testdir)
mavproxy.send("param load %s/Rover-def.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# restart with new parms
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sim_cmd = util.reltopdir('Tools/autotest/pysim/sim_rover.py') + ' --rate=50 --home=%f,%f,%u,%u' % (
HOME.lat, HOME.lng, HOME.alt, HOME.heading)
runsim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
runsim.delaybeforesend = 0
util.pexpect_autoclose(runsim)
runsim.expect('Starting at lat')
if loop_mode == 'SIL':
sil = util.start_SIL('APMrover2')
mavproxy = util.start_MAVProxy_SIL('APMrover2', options=options)
if loop_mode == 'HIL':
sil = util.start_HIL('APMrover2')
mavproxy = util.start_MAVProxy_HIL('APMrover2', options=options)
mavproxy.expect('Logging to (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/APMrover2-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
mavproxy.expect('Received [0-9]+ parameters')
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([runsim, sil, mavproxy])
print("Started simulator")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:robolamp， 项目名称:rAutotest， 代码行数:82， 代码来源:apmrover2.py
示例11: setup_class
def setup_class(cls):
#Set this to False to enable logging.
DEBUG = False
CONSOLE = False
cls.TIMEOUT=5
cls.DELAY=2
cls.resource_path = os.path.join(os.path.join(os.path.dirname(os.path.abspath(__file__)), 'TestGroupLib/'), 'Resources/')
#start MAVLink, etc
try:
os.remove('eeprom.bin')
except OSError:
pass
try:
os.remove('jsb_pipe')
os.remove('mavproxy_pipe')
except Exception:
pass
util.run_cmd('mkfifo mavproxy_pipe')
util.run_cmd('mkfifo jsb_pipe')
if DEBUG:
util.run_cmd('xterm -e tail -f jsb_pipe &')
util.run_cmd('xterm -e tail -f mavproxy_pipe &')
util.run_cmd('echo "INITIALIZED MAVPROXY PIPE" > mavproxy_pipe &')
util.run_cmd('echo "INITIALIZED JSBSIM PIPE" > jsb_pipe &')
cls.homeloc = None
HOME_LOCATION='35.7168007,-120.7644466,275,295' #McMillan Lat/Lon/Alt/Heading
WIND="0,180,0.0" # speed,direction,variance
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=100 '
#Start SITL
cls.sil = util.start_SIL('ArduPlane', wipe=True)
cls.mavproxy = util.start_MAVProxy_SIL('ArduPlane', options=options)
cls.mavproxy.expect('Received [0-9]+ parameters')
#Load SITL params
cls.mavproxy.send("param load %ssitl.parm\n" % cls.resource_path)
cls.mavproxy.expect('Loaded [0-9]+ parameters')
#Fetch list of params
cls.mavproxy.send("param fetch\n")
#TODO: Optimize this. Is it necessary to start and close it?
util.pexpect_close(cls.mavproxy)
util.pexpect_close(cls.sil)
#Start JSBSim simulation
cmd = util.reltopdir("Tools/autotest/jsbsim/runsim.py")
cmd += " --home=%s --wind=%s" % (HOME_LOCATION, WIND)
#cls.runsim = pexpect.spawn(cmd, logfile=sys.stdout, timeout=10)
cls.runsim = pexpect.spawn(cmd, logfile=file('jsb_pipe', 'w+', 0), timeout=10)
cls.runsim.delaybeforesend = 0
util.pexpect_autoclose(cls.runsim)
cls.runsim.expect('Simulator ready to fly.')
cls.sil = util.start_SIL('ArduPlane', valgrind=True)
options += ' --map'
if CONSOLE:
options += ' --console'
cls.mavproxy = util.start_MAVProxy_SIL('ArduPlane',
logfile=file('mavproxy_pipe', 'w+', 0), options=options)
#TODO: Make these easier to find
cls.mavproxy.expect('Logging to (\S+)')
logfile = cls.mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
#TODO: Make these easier to find
buildlog = util.reltopdir("../buildlogs/ArduPlane-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
cls.mavproxy.expect('Received [0-9]+ parameters')
util.expect_setup_callback(cls.mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([cls.runsim, cls.sil, cls.mavproxy])
print("Started simulator.")
#Get a mavlink connection started.
try:
cls.mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:jdrusso， 项目名称:arsenl-testing， 代码行数:98， 代码来源:GenericTest.py
示例12: fly_ArduCopter
def fly_ArduCopter(binary, viewerip=None, use_map=False, valgrind=False, gdb=False):
"""fly ArduCopter in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the flight in real time
"""
global homeloc
home = "%f,%f,%u,%u" % (HOME.lat, HOME.lng, HOME.alt, HOME.heading)
sil = util.start_SIL(binary, wipe=True, model="+", home=home, speedup=speedup_default)
mavproxy = util.start_MAVProxy_SIL("ArduCopter", options="--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter")
mavproxy.expect("Received [0-9]+ parameters")
# setup test parameters
mavproxy.send("param load %s/copter_params.parm\n" % testdir)
mavproxy.expect("Loaded [0-9]+ parameters")
mavproxy.send("param set LOG_REPLAY 1\n")
mavproxy.send("param set LOG_DISARMED 1\n")
time.sleep(3)
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL(binary, model="+", home=home, speedup=speedup_default, valgrind=valgrind, gdb=gdb)
options = "--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5"
if viewerip:
options += " --out=%s:14550" % viewerip
if use_map:
options += " --map"
mavproxy = util.start_MAVProxy_SIL("ArduCopter", options=options)
mavproxy.expect("Telemetry log: (\S+)")
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/ArduCopter-test.tlog")
print("buildlog=%s" % buildlog)
copyTLog = False
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
print(
"WARN: Failed to create symlink: "
+ logfile
+ " => "
+ buildlog
+ ", Will copy tlog manually to target location"
)
copyTLog = True
# the received parameters can come before or after the ready to fly message
mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])
mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sil, mavproxy])
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection("127.0.0.1:19550", robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:gjweppler， 项目名称:ardupilot， 代码行数:67， 代码来源:arducopter.py
示例13: fly_ArduPlane
def fly_ArduPlane(viewerip=None):
"""fly ArduPlane in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the flight in real time
"""
global expect_list, homeloc
options = "--fgout=127.0.0.1:5502 --fgin=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=5"
if viewerip:
options += " --out=%s:14550" % viewerip
sil = util.start_SIL("ArduPlane", wipe=True)
mavproxy = util.start_MAVProxy_SIL("ArduPlane", options=options)
mavproxy.expect("Received [0-9]+ parameters")
# setup test parameters
mavproxy.send("param load %s/ArduPlane.parm\n" % testdir)
mavproxy.expect("Loaded [0-9]+ parameters")
# restart with new parms
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL("ArduPlane")
mavproxy = util.start_MAVProxy_SIL("ArduPlane", options=options)
mavproxy.expect("Logging to (\S+)")
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/ArduPlane-test.mavlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
os.link(logfile, buildlog)
mavproxy.expect("Received [0-9]+ parameters")
util.expect_setup_callback(mavproxy, expect_callback)
fg_scenery = os.getenv("FG_SCENERY")
if not fg_scenery:
raise RuntimeError("You must set the FG_SCENERY environment variable")
fgear_options = (
"""
--generic=socket,in,25,,5502,udp,MAVLink \
--generic=socket,out,50,,5501,udp,MAVLink \
--aircraft=Rascal110-JSBSim \
--control=mouse \
--disable-intro-music \
--airport=YKRY \
--lat=-35.362851 \
--lon=149.165223 \
--heading=350 \
--altitude=0 \
--geometry=650x550 \
--jpg-httpd=5502 \
--disable-anti-alias-hud \
--disable-hud-3d \
--disable-enhanced-lighting \
--disable-distance-attenuation \
--disable-horizon-effect \
--shading-flat \
--disable-textures \
--timeofday=noon \
--fdm=jsb \
--disable-sound \
--disable-fullscreen \
--disable-random-objects \
--disable-ai-models \
--shading-flat \
--fog-disable \
--disable-specular-highlight \
--disable-skyblend \
--fg-scenery=%s \
--disable-anti-alias-hud \
[email protected] \
"""
% fg_scenery
)
# start fgear
if os.getenv("DISPLAY"):
cmd = "fgfs %s" % fgear_options
fgear = pexpect.spawn(cmd, logfile=sys.stdout, timeout=10)
else:
cmd = "xvfb-run --server-num=42 -s '-screen 0 800x600x24' fgfs --enable-wireframe %s" % fgear_options
util.kill_xvfb(42)
fgear = pexpect.spawn(cmd, logfile=sys.stdout, timeout=10)
fgear.xvfb_server_num = 42
util.pexpect_autoclose(fgear)
fgear.expect("creating 3D noise", timeout=30)
expect_list.extend([fgear, sil, mavproxy])
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection("127.0.0.1:19550", robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
#.........这里部分代码省略.........
开发者ID:BernieLiu， 项目名称:ardupilotone， 代码行数:101， 代码来源:arduplane.py
示例14: fly_CopterAVC
def fly_CopterAVC(viewerip=None, map=False):
"""fly ArduCopter in SIL for AVC2013 mission
"""
global homeloc
if TARGET != "sitl":
util.build_SIL("ArduCopter", target=TARGET)
sim_cmd = util.reltopdir("Tools/autotest/pysim/sim_multicopter.py") + " --frame=%s --home=%f,%f,%u,%u" % (
FRAME,
AVCHOME.lat,
AVCHOME.lng,
AVCHOME.alt,
AVCHOME.heading,
)
if viewerip:
sim_cmd += " --fgout=%s:5505" % viewerip
sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
sim.delaybeforesend = 0
util.pexpect_autoclose(sim)
sil = util.start_SIL("ArduCopter", wipe=True)
mavproxy = util.start_MAVProxy_SIL("ArduCopter", options="--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter")
mavproxy.expect("Received [0-9]+ parameters")
# setup test parameters
mavproxy.send("param load %s/copter_AVC2013_params.parm\n" % testdir)
# mavproxy.send("param load %s/copter_params.parm\n" % testdir)
mavproxy.expect("Loaded [0-9]+ parameters")
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL("ArduCopter", height=HOME.alt)
options = "--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5"
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += " --map"
mavproxy = util.start_MAVProxy_SIL("ArduCopter", options=options)
mavproxy.expect("Logging to (\S+)")
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/CopterAVC-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
# the received parameters can come before or after the ready to fly message
mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])
mavproxy.expect(["Received [0-9]+ parameters", "Ready to FLY"])
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sim, sil, mavproxy])
if map:
mavproxy.send("map icon 40.072467969730496 -105.2314389590174\n")
mavproxy.send("map icon 40.072600990533829 -105.23146100342274\n")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection("127.0.0.1:19550", robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:nwind21， 项目名称:ardupilot， 代码行数:74， 代码来源:arducopter.py
示例15: fly_CopterAVC
def fly_CopterAVC(viewerip=None, map=False):
'''fly ArduCopter in SIL for AVC2013 mission
'''
global homeloc
if TARGET != 'sitl':
util.build_SIL('ArduCopter', target=TARGET)
sim_cmd = util.reltopdir('Tools/autotest/pysim/sim_multicopter.py') + ' --frame=%s --rate=400 --home=%f,%f,%u,%u' % (
FRAME, AVCHOME.lat, AVCHOME.lng, AVCHOME.alt, AVCHOME.heading)
if viewerip:
sim_cmd += ' --fgout=%s:5503' % viewerip
sil = util.start_SIL('ArduCopter', wipe=True)
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options='--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter')
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send('param set SYSID_THISMAV %u\n' % random.randint(100, 200))
mavproxy.send("param load %s/CopterAVC.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
# reboot with new parameters
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
sil = util.start_SIL('ArduCopter', height=HOME.alt)
sim = pexpect.spawn(sim_cmd, logfile=sys.stdout, timeout=10)
sim.delaybeforesend = 0
util.pexpect_autoclose(sim)
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --quadcopter --streamrate=5'
if viewerip:
options += ' --out=%s:14550' % viewerip
if map:
options += ' --map'
mavproxy = util.start_MAVProxy_SIL('ArduCopter', options=options)
mavproxy.expect('Logging to (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/CopterAVC-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
os.link(logfile, buildlog)
# the received parameters can come before or after the ready to fly message
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
mavproxy.expect(['Received [0-9]+ parameters', 'Ready to FLY'])
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([sim, sil, mavproxy])
if map:
mavproxy.send('map icon 40.072467969730496 -105.2314389590174\n')
mavproxy.send('map icon 40.072600990533829 -105.23146100342274\n')
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:jschall， 项目名称:ardupilot， 代码行数:65， 代码来源:arducopter.py
示例16: fly_ArduPlane
def fly_ArduPlane(viewerip=None, map=False):
'''fly ArduPlane in SIL
you can pass viewerip as an IP address to optionally send fg and
mavproxy packets too for local viewing of the flight in real time
'''
global homeloc
options = '--sitl=127.0.0.1:5501 --out=127.0.0.1:19550 --streamrate=10'
if viewerip:
options += " --out=%s:14550" % viewerip
if map:
options += ' --map'
sil = util.start_SIL('ArduPlane', wipe=True)
mavproxy = util.start_MAVProxy_SIL('ArduPlane', options=options)
mavproxy.expect('Received [0-9]+ parameters')
# setup test parameters
mavproxy.send("param load %s/ArduPlane.parm\n" % testdir)
mavproxy.expect('Loaded [0-9]+ parameters')
mavproxy.send("param fetch\n")
# restart with new parms
util.pexpect_close(mavproxy)
util.pexpect_close(sil)
cmd = util.reltopdir("Tools/autotest/jsbsim/runsim.py")
# util.reltopdir("Tools/autotest/sim_arduplane_hil.sh")
# cmd += " --home=%s --wind=%s --script='%s/jsbsim/SW13_test.xml' "% (HOME_LOCATION, WIND, testdir)
#Original
cmd += " --home=%s --wind=%s"% (HOME_LOCATION, WIND)
if viewerip:
cmd += " --fgout=%s:5503" % viewerip
runsim = pexpect.spawn(cmd, logfile=sys.stdout, timeout=10)
runsim.delaybeforesend = 0
util.pexpect_autoclose(runsim)
runsim.expect('Simulator ready to fly')
sil = util.start_SIL('ArduPlane')
mavproxy = util.start_MAVProxy_SIL('ArduPlane', options=options)
mavproxy.expect('Logging to (\S+)')
logfile = mavproxy.match.group(1)
print("LOGFILE %s" % logfile)
buildlog = util.reltopdir("../buildlogs/ArduPlane-test.tlog")
print("buildlog=%s" % buildlog)
if os.path.exists(buildlog):
os.unlink(buildlog)
try:
os.link(logfile, buildlog)
except Exception:
pass
mavproxy.expect('Received [0-9]+ parameters')
util.expect_setup_callback(mavproxy, expect_callback)
expect_list_clear()
expect_list_extend([runsim, sil, mavproxy])
print("Started simulator")
# get a mavlink connection going
try:
mav = mavutil.mavlink_connection('127.0.0.1:19550', robust_parsing=True)
except Exception, msg:
print("Failed to start mavlink connection on 127.0.0.1:19550" % msg)
raise开发者ID:robolamp， 项目名称:rAutotest， 代码行数:71， 代码来源:arduplane.py
Python入门教程 Python 是一种解释型、面向对象、动态数据类型的高级程序设计语言。 P
阅读：11023| 2022-01-22
Python wikiutil.getFrontPage函数代码示例
阅读：5032| 2022-05-24
Python tests.group函数代码示例
阅读：3886| 2022-05-27
Python 简介 Python 是一个高层次的结合了解释性、编译性、互动性和面向对象的脚本
阅读：3422| 2022-01-22
Python 练习实例98 Python 100例题目：从键盘输入一个字符串，将小写字母全部转换成大
阅读：3348| 2022-01-22
Python util.check_if_user_has_permission函数代码示例
阅读：3272| 2022-05-27
Python 环境搭建 本章节我们将向大家介绍如何在本地搭建 Python 开发环境。 Py
阅读：2718| 2022-01-22
Python output.darkgreen函数代码示例
阅读：2242| 2022-05-25
Python 基础语法 Python 语言与 Perl，C 和 Java 等语言有许多相似之处。但是，也
阅读：2128| 2022-01-22
Python 中文编码前面章节中我们已经学会了如何用 Python 输出 Hello, World!，英文没
阅读：2050| 2022-01-22
客服电话
APP下载
官方微信
请发表评论